Browse the full collection of oil mist fittings from ALEMITE online. Learn more on the official SKF Group website.

Modern oil mist lubrication systems, such as those offered by SKF, are tai-lored to minimize loating mist and are used in combination with non-toxic and non-carcinogenic oils and appropriate sealing systems to address environ-mental and health concerns, These systems, when properly man-

Mist (Header) Pipe “Slope” The “oil mist” is produced by atomizing oil into a com-pressed air stream. The resulting mist resembles smoke and consists of a small amount of oil (in very tiny 1-3 micron size particles) mixed with a large volume of compressed air. Since the mixture is so “lean or dry”, it is not fl ammable and can be

Oil-Mist Generator. Contents Safety 3 Signal words for safety 3 Description 4 General safety requirements 4 ... 2 Manually closing DS-1 starts oil mist system 3 When system stabilizes, DS-2 closes to lock in WS alarm (light signal and

72 oz. bottle with special aluminum cap allows condensed oil and vented mist to be collected from up to six bearing housings. Translucent bottle allows visual inspection of oil level. Bottle is easily removable for proper disposal of condensed oil.

SKF

Alemite Oil-Mist Generators provide lubrication for multiple lubrication points or machines. The lubricators in the 372x provide a flow range up to 73 CFM. 120 V AC and 240 V AC versions available.

Alemite Oil-Mist Generators provide lubrication for multiple lubrication points or machines. The lubricators in the 3942 series are either basic models or plate mounted. They provide a flow range of 0.3 to 1.4 CFM.

mist outlet, a pressure relief valve, filler plug and drain plug. Optional accessories are available to augment a basic mist system. An oil fill sight tube, located on the front of the reservoir, provides an easy, accessible reading of lubricant supply. See Table 1 for these basic components associated with each reservoir. MIST GENERATING HEAD

During this same period, Alemite engineers developed the Oil-Mist System of lubrication for commercial applications. It had several advantages over other methods of lubrication, speciically where continuous lubrication was needed. The system did not have any moving parts yet could deliver a constant,