
Analog 0 to 1 V, 1 kW output impedance, BNC connector. Two outputs are available on E4417A (channels A and B). High = 4.8 V max; Low = 0.2 V max. Serial interface for communication with an external controller. Male plug 9-pin D-subminiature connector. GPIB interface operates to IEEE 488.2 and IEC-625.
E4417A EPM-P Series Dual-Channel Power Meter - Keysight
E4417A dual channel power meter provides peak, peak-to-average ratio, average power, and time-gated measurements on TDMA and W-CDMA wireless formats.
The Keysight EPM-P Series power meter firmware is upgraded by downloading new firmware files from the Keysight EPM and EPM-P Series product page. This requires the firmware files and the Keysight EPM and EPM-P Dload program. “Step 1: Obtaining The Firmware And Download Program From The Internet” on page 11.
Two outputs are available on E4417A (channels A and B). Trigger out: Outputs a TTL signal for synchronizing with external equipment, BNC connector.
Agilent Technologies / Keysight Technologies E4417B - National Instruments
The LabVIEW Instrument Driver Import Wizard allows you to convert an instrument driver from LabWindows/CVI (C source) to a LabVIEW wrapper (DLL). The LabVIEW Instrument Driver Export Wizard allows you to convert a LabVIEW (8.x) project-style …
Agilent Technologies / Keysight Technologies E441X Series Meter
Oct 31, 2005 · Find instrument drivers that are available for this instrument for use in LabVIEW, LabWindows/CVI, or Measurement Studio. Example programs are included with most instrument driver downloads.
Sep 21, 2017 · Designed primarily for average power measurements on low-level signals. This mode is the only mode used with 8480 and N8480 series sensors, E-series CW sensors and E-series E9300 sensors.
E4417A EPM-P 系列双通道功率计 - Keysight
E4417A 双通道功率计可以对 TDMA 和 W-CDMA 无线制式和脉冲信号进行峰值功率、峰均比、平均功率以及时间选通等测量。
Jan 15, 2015 · 03 | Keysight | E4416A/E4417A EPM-P Series Power Meters and E-Series E9320 Peak and Average Power Sensors – Data Sheet Single Sensor Dynamic Range
Specifications describe the instrument’s warranted perfor-mance and apply after a 30 minute warm-up. These speci-fications are valid over its operating and environmental range unless otherwise stated and after performing a zero and calibration procedure.
- Some results have been removed