Jan 13, 2008 · When operating an AMD Phenom in a AM2 motherboard, it should be noted that the highest HT link from the chipset depends, not on the K10. This means that the rule again as the K8, the HT-link possible in the range of 1,000 MHz to keep. Prerequisite for the operation of a K10 in a pure-AM2 motherboard is the support of the processor by the BIOS.

Jul 6, 2009 · The current K10.5 design is an evolution of the older AMD Phenom Design (K10) which had 1 piece of silicon being made producing 4 Cores on this one die, and then disabling or lazer cutting (which has been done by GPU's in the past) to make lower end chips because 1 or more of the cores did not function properly.

Aug 17, 2007 · id rather AMD come out and tell us something to get the rumors to either die. or go in the proper direction.... until AMD decides to tell us stuff. they are just pissing off possible customers. and cause untrue rumors... for all we know. k10 might perform 10% better than k8...

May 16, 2012 · Hey guys. I recently decided to overclock my laptop. I did my research and my processor, an AMD A8-3500M, is supposed to handle overclocking pretty well, so I went ahead and downloaded K10stat and got to work. I changed the processor states as follows: STATE, FID, DID, Voltage B0, 26, 1, 1.35...

Sep 26, 2011 · AMD K10 family includes 12 desktop Sempron, Athlon II and Phenom II families, which differ from each other by the number of cores - from 1 to 6, the size of L2 cache - 512 KB or 1 MB per core, and the size of L3 cache - from 4 to 6 MB L3 cache or no cache at all.

Jun 11, 2009 · Software, Programming and Coding. Other Software

Jul 6, 2009 · AMD K10.5* Core & Cache Unlocking Guide *K10.5 includes Athlon II, Phenom II, & Sempron II CPU's Introduction Core unlocking of AMD chips has been a very hot topic of discussion. The possibility of spending a mere $100 dollars for a Phenom II X2/X3 chip and unlocking the disabled cores to yield...

Dec 29, 2008 · -Enable change Core and UnCore Multiplier on AMD Phenom CPU.-Improve Reading frequency.-Add two timings: "B2B CAS delay" and "Idle Cycle limit" on Core i7 CPU, "Driver Weak mode" and "Power Down mode" on Phenom CPU.-Some little change in …

May 4, 2007 · Dark Mode; Light Mode; Menu

Jul 26, 2011 · wondering if these settings are fine Frequency CPU voltage P0 - 3700 1.3 P1 - 3000 1.275 P2 - 2300 1.175 P3 - 800 0.7750 NB Voltage for everything: 1.1 up response delay is 200ms down response delay is 500ms P0 to P2 is stable P3 is stable at 0.7750 I got it to .75 but BSOD when I tried to...